Tripp Lite - Tripp Lite Duplex Multimode Fiber Coupler, Keystone Jack - LC to LC, Blue
Stock | 0 |
Ship | 1 day |
Product code | N455-000-BL-KJ |
EAN/UPC | 0037332222329 |
Packaging unit | 1 |
Documentation |
leaflet |
Description |
Tripp Lite Duplex Multimode Fiber Coupler, Keystone Jack - LC to LC, Blue. Connector type: LC/LC, Product colour: Blue, Fiber mode structure: Multi-mode. Quantity per pack: 1 pc(s), Package width: 101.6 mm, Package depth: 12.7 mm. Master (outer) case width: 18.5 cm, Master (outer) case length: 22.9 cm, Master (outer) case height: 1.27 cm
LC Duplex Coupler Extends Length of Fiber Optic Cable Run Tripp Lite’s fiber optic LC coupler connects two 62.5/125 or 50/125 multimode fiber cables with LC connectors to extend the length of the cable run. The duplex adapter accepts two simplex connectors or one duplex connector. Mounts in a Keystone Patch Panel or Wall Plate This LC to LC fiber coupler is designed to snap easily into a keystone patch panel or wall plate. This allows you to route cables through walls and provides a convenient connection to your fiber network. Lifetime Limited Warranty This multimode fiber coupler comes with a lifetime limited warranty. Typical Application ● Joins two LC fiber optic cables to extend a cable run ● Allows for customizing a keystone wall plate for LC connectors in a fiber network ● Dual LC/LC coupler for extending cables in a faceplate or keystone panel ● High-precision mating structure with low insertion loss ● Duplex adapter accepts two simplex connectors or one duplex connector ● Works with 62.5/125 or 50/125 multimode fiber cables Package Includes ● N455-000-BL-KJ Duplex Multimode Fiber Coupler, Keystone Jack (LC/LC) – Blue |
The electrical or electronic product contains little or no Hazardous Substances (RoHS). Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component.
Recently Visited