Tripp Lite - Tripp Lite HP J4858C Compatible 1000Base-SX LC SFP Transceiver, DDM, MMF, 850 nm, 550 m
| Stock | 0 |
| Ship | 1 day |
| Product code | N286-01GSX-MLC |
| EAN/UPC | 0037332197443 |
| Packaging unit | 1 |
| Documentation |
| Description |
|
Tripp Lite HP J4858C Compatible 1000Base-SX LC SFP Transceiver, DDM, MMF, 850 nm, 550 m. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP+. Product colour: Metallic. Width: 13.2 mm, Depth: 56.9 mm, Height: 8.4 mm. Number of products included: 1 pc(s), Package width: 114 mm, Package depth: 45 mm. Master (outer) case width: 23 cm, Master (outer) case length: 13 cm, Master (outer) case height: 5.99 cm
The N286-01GSX-MLC HP J4858C Compatible 1000Base-SX LC SFP Transceiver with an LC female connector functions just like the HP J4858C transceiver module and is designed to operate with HP networking equipment. It also meets or exceeds the J4858C’s original specifications and complies with MSA (Multi-Source Agreement) standards. This 1000Base-SX transceiver is fully hot-pluggable, so you can install it without shutting down the network or rebooting your device. It supports data transfer rates up to 1 Gbps with 850 nm wavelength signaling. It transmits across 1,804 feet (550 meters) of 50/125 MMF cabling or 722 feet (220 meters) of 62.5/125 MMF cabling. 1000Base-SX Transceiver with LC Connector ● Hot-pluggable for installation without rebooting or shutting down ● Data transfer rates up to 1 Gbps ● Transmits up to 1,804 ft. (550 m) with 50/125 MMF cabling ● Transmits up to 722 ft. (220 m) with 62.5/125 MMF cabling ● 850 nm wavelength signaling Designed for Use with HP Networking Equipment ● Functionally equivalent to HP J4858C ● Meets or exceeds J4858C specs ● Complies with MSA standards |
The electrical or electronic product contains little or no Hazardous Substances (RoHS). Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component.
